generally, while driving the vehicle the clutch, brake and accelerator pedal under the feet should be operated more.
but in these the clutch pedal is more hard. because it’s job is to send the engine power to the gear box or drive wheels and stop it.
hence the pressure is high on it.
this is a semi touch clutch in the process the clutch need not be operated by the legs.
easy to operate by just gear lever knob. just press the semi touch clutch button as much as needed and the clutch motor will open and close as much as we need. it reduces the stress on your legs by upto 50% while driving.
this reduces pressure on legs and increases concentration on driving .
accidents are reduced.
the journey becomes very comfortable.
this touch button runs on a very light spring. therefore, if we gives light touch , the same clutch will operate.
have a pleasant journey. that is the meaning of our intelligence.
How Semi Touch Clutch Works:
The function of the clutch is to transfer or stop the power generated in the engine, usually to the gearbox or drive wheels.
In this, the shaft that provides the engine power, and the soft one that takes the gear box, are arranged near one.
At the end of two shafts are arranged like wheels.
When connecting the two wheels, non-slip material (friction metal) is arranged for those wheels.
When the clutch fully connected the two wheels, all the engine power is provided to the gearbox.
The clutch, if slightly connected, provides some power to the gearbox.
Also, if the engine is driven at a high speed and the clutch is connected
once, a very lot of power is provided to the gear box.
The vehicle is forced to deliver engine power according to the road conditions ahead.
However, what the clutch has to do in this whole operation is to open or close the clutch as needed .
That is, the only function of the clutch is to press the clutch more, press or less through a cable.
Now let’s come to the touch clutch.
Now let’s come to the touch clutch.
Here, in touch clutch, one motor does total this work .
Here, one motor, controls how much the clutch should open and how much it should close, with the help of a speed regulator.
The more you press this semi-touch clutch button, the faster the motor will run.
This touch clutch runs on a light spring. That’s why a touch-like press is enough and the clutch works.
That’s why semi-touch clutch name is perfect for this.
This, in turn, changes your entire driving experience. Essentially, it transforms a city drive into a Joyful drive.
You, drive safely and enjoy. That is the our’s meaning of engineering .
In this project survey
A senior driver Mr. Mudidhaana Simhachalam, Kothapally expressed a good doubt.
This doubt comes to all who drive. That is why we are explaining about it here.
Sir Mudidhana Simhachalam first you should know about one thing.
The power from the engine is transmitted through a part called a “springer” to a part called a clutch plate and the vehicle runs.
Here the clutch plate is open. The springer, between the clutch plate, is meant to cause a gap of just a few millimeters.
Now whether you press the clutch plate hard, soft, fast or slow. The last thing that happens
A gap of a few millimeters is to be created.
Now the semi-touch clutch does the same thing, well, the same way.
The plate above the gear knob should be used in the same way as the clutch pedal is pressed with the foot.
If you fully press the plate above the gear knob, the clutch will fully open.
A little press will open the clutch a little.
A faster press will open the clutch faster.
If pressed slowly, the clutch opens slowly.
The hand should be used in the same way as the leg is used.
After a few days it will feel new to you.
Then it becomes a habit. How comfortable this system is, you will know by experience.
Thank you for reading and understanding our project.
Also tell your friends about this site. Offer these benefits to them too.
